|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
STTH1202 Ultrafast recovery diode Main product characteristics IF(AV) VRRM Tj (max) VF (typ) trr (typ) 12 A 200 V 175 C 0.82 V 18 ns A K K Features and benefits A K TO-220AC STTH1202D A K TO-220FPAC STTH1202FP Very low conduction losses Negligible switching losses Low forward and reverse recovery time High junction temperature Insulated packages - TO-220FPAC Electrical insulation 1500 VRMS - TO-220AC Ins Electrical insulation 2500 VRMS A K TO-220AC Ins STTH1202DI Description The STTH1202 uses ST's new 200V planar Pt doping technology, and is specially suited for switching mode base drive and transistor circuits. Packaged in TO-220AC, TO-220FPAC, and TO-220AC Ins, this device is intended for use in low voltage, high frequency inverters, free wheeling and polarity protection. Order codes Part Number STTH1202D STTH1202FP STTH1202DI Marking STTH1202 STTH1202 STTH1202DI March 2007 Rev 1 1/10 www.st.com Characteristics STTH1202 1 Table 1. Symbol VRRM VRSM IF(RMS) Characteristics Absolute ratings (limiting values at Tj = 25 C, unless otherwise specified) Parameter Repetitive peak reverse voltage Non repetitive peak reverse voltage RMS forward current TO-220AC IF(AV) Average forward current, = 0.5 TO-220AC Ins TO-220FPAC IFRM IFSM Tstg Tj Repetitive peak forward current Surge non repetitive forward current Storage temperature range Maximum operating junction temperature Tc = 140 C Tc = 130 C Tc = 105 C 130 100 -65 to + 175 175 A A C C 12 A Value 200 V 200 30 A Unit tp = 10 s F = 5 kHz square tp = 10 ms Sinusoidal Table 2. Thermal parameters Parameter TO-220AC Value 2.5 3 5 C/W Unit Symbol Rth(j-c) Junction to case TO-220AC Ins TO-220FPAC Table 3. Symbol IR(1) Static electrical characteristics Parameter Reverse leakage current Test conditions Tj = 25 C Tj = 125 C Tj = 25 C Tj = 150 C VR = VRRM Min. Typ Max. 10 A 10 1.0 IF = 12 A 0.82 100 1.10 0.95 1.15 IF = 15 A 0.91 0.87 1.05 1.0 V Unit VF(2) Forward voltage drop Tj = 25 C Tj = 125 C Tj = 150 C 1. Pulse test: tp = 5 ms, < 2 % 2. Pulse test: tp = 380 s, < 2 % To evaluate the conduction losses use the following equation: P = 0.77 x IF(AV) + 0.015 x IF2(RMS) 2/10 STTH1202 Table 4. Symbol Characteristics Dynamic characteristics Parameter Test conditions IF = 1 A, dIF/dt = -50 A/s, VR = 30 V, Tj = 25 C IF = 1 A, dIF/dt = -100 A/s, VR = 30 V, Tj = 25 C Min. Typ 28 18 5.8 110 2 Max. 35 24 7.5 A ns V Unit ns trr Reverse recovery time IRM tfr VFP Reverse recovery current Forward recovery time Forward recovery voltage IF = 12 A, dIF/dt = -200 A/s, VR = 160 V, Tj = 125 C IF = 12 A, dIF/dt = 100 A/s VFR = 1.1 x VFmax, Tj = 25 C IF = 12 A, dIF/dt = 100 A/s, Tj = 25 C Figure 1. IM(A) 80 Peak current versus duty cycle Figure 2. IFM(A) 200 Forward voltage drop versus forward current (typical values) IM T 180 160 Tj=150C (maximum values) 60 =tp/T tp 140 120 40 P = 5W P = 2W 100 80 60 Tj=150C (typical values) Tj=25C (maximum values) 20 P = 1W 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 40 20 0 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 VFM(V) Figure 3. Relative variation of thermal impedance, junction to case, versus pulse duration (TO-220AC, TO-220AC Ins) Figure 4. Relative variation of thermal impedance, junction to case, versus pulse duration (TO-220FPAC) Zth(j-c)/Rth(j-c) 1.0 Single pulse TO-220AC TO-220AC Ins Zth(j-c)/Rth(j-c) 1.0 Single pulse TO-220FPAC 0.1 tp(s) 0.1 1.E-03 1.E-02 1.E-01 1.E+00 0.0 1.E-03 1.E-02 tp(s) 1.E-01 1.E+00 1.E+01 3/10 Characteristics STTH1202 Figure 5. Junction capacitance versus reverse applied voltage (typical values) F=1MHz VOSC=30mVRMS Tj=25C Figure 6. Reverse recovery charges versus dIF/dt (typical values) C(pF) 100 200 180 160 140 120 100 80 60 40 Qrr(nC) VR=160V IF=12A Tj=125C Tj=25C VR(V) 10 1 10 100 1000 20 0 10 dIF/dt(A/s) 100 1000 Figure 7. trr(ns) 100 90 80 70 60 50 40 Reverse recovery time versus dIF/dt Figure 8. (typical values) IRM(A) 14 VR=160V IF=12A VR=160V IF=12A Peak reverse recovery current versus dIF/dt (typical values) 12 10 8 6 Tj=25C Tj=125C Tj=125C 30 20 10 0 10 100 1000 4 2 Tj=25C dIF/dt(A/s) 0 10 dIF/dt(A/s) 100 1000 Figure 9. Dynamic parameters versus junction temperature Qrr;IRM [Tj]/IRM [Tj=125C] 1.4 VR=160V IF=12A 1.2 1.0 0.8 0.6 0.4 0.2 IRM QRR Tj(C) 0.0 25 50 75 100 125 150 4/10 STTH1202 Ordering information scheme 2 Ordering information scheme STTH Ultrafast switching diode Average forward current 12 = 12 A Repetitive peak reverse voltage 02 = 200 V Package D = TO-220AC FP = TO-220FPAC DI = TO-220AC Ins 12 02 XX 5/10 Package information STTH1202 3 Package information Epoxy meets UL94, V0 Cooling method: by conduction (C) Recommended torque value: 0.55 Nm Maximum torque value: 0.7 Nm T0-220AC dimensions DIMENSIONS REF. Millimeters Min. A H2 OI L5 L7 L6 L2 C A Table 5. Inches Min. 0.173 0.048 0.094 0.019 0.024 0.044 0.194 0.393 Max. 0.181 0.051 0.107 0.027 0.034 0.066 0.202 0.409 Max. 4.60 1.32 2.72 0.70 0.88 1.70 5.15 10.40 4.40 1.23 2.40 0.49 0.61 1.14 4.95 10.00 C D E F F1 G F1 L9 L4 F D H2 L2 M E G 16.40 typ. 13.00 2.65 15.25 6.20 3.50 14.00 2.95 15.75 6.60 3.93 0.645 typ. 0.511 0.104 0.600 0.244 0.137 0.551 0.116 0.620 0.259 0.154 L4 L5 L6 L7 L9 M Diam. I 2.6 typ. 3.75 3.85 0.102 typ. 0.147 0.151 6/10 STTH1202 Table 6. T0-220FPAC dimensions Package information DIMENSIONS REF Millimeters Min. A A H B Inches Min. 0.173 0.098 0.098 0.018 0.030 0.045 0.195 0.094 0.393 Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.205 0.106 0.409 Max. 4.6 2.7 2.75 0.70 1 1.70 5.20 2.7 10.4 4.4 2.5 2.5 0.45 0.75 1.15 4.95 2.4 10 B D Dia L6 L2 L3 L5 F1 L4 D L7 E F F1 G G1 H L2 16 Typ. 28.6 9.8 2.9 15.9 9.00 3.00 30.6 10.6 3.6 16.4 9.30 3.20 0.63 Typ. 1.126 0.386 0.114 0.626 0.354 0.118 1.205 0.417 0.142 0.646 0.366 0.126 F G1 G E L3 L4 L5 L6 L7 Dia. 7/10 Package information Table 7. TO-220AC Ins. dimensions Dimensions Ref. Millimeters Min. A B OI L F b2 C STTH1202 Inches Min. Typ. Max. 0.625 0.147 Typ. Max. 15.20 3.75 13.00 10.00 0.61 1.23 4.40 0.49 2.40 4.80 6.20 3.75 15.90 0.598 a1 a2 B b1 14.00 0.511 10.40 0.393 0.88 1.32 4.60 0.70 2.72 5.40 6.60 3.85 0.024 0.048 0.173 0.019 0.094 0.189 0.244 0.147 0.551 0.409 0.034 0.051 0.181 0.027 0.107 0.212 0.259 0.151 A I4 b2 C c2 a1 l2 c1 c2 e a2 M b1 e c1 F OI I4 L l2 M 15.80 16.40 16.80 0.622 0.646 0.661 2.65 1.14 2.60 2.95 1.70 0.104 0.044 0.102 0.116 0.066 In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 8/10 STTH1202 Ordering information 4 Ordering information Part Number STTH1202D STTH1202FP STTH1202DI Marking STTH1202 STTH1202 STTH1202DI Package TO-220AC TO-220FPAC TO-220AC Ins Weight 1.86 g 1.64 g 2.3 g Base qty 50 50 50 Delivery mode Tube Tube Tube 5 Revision history Date 01-Mar-2007 Revision 1 First issue. Description of Changes 9/10 STTH1202 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 |
Price & Availability of STTH1202 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |